Between the measurements, putting all the parts together properly, and the ladder balancing acts, installing a garage opener can be a tricky business. It's easy to confuse measurements or opener pieces, and quickly become frustrated. Here are some tips on garage opener installation in Marietta to help make the experience much easier on you.
Take Inventory
You should lay all the parts out, go through them, and make sure that you have all of the ones that you're supposed to. It's a rough business to start building and realize midway that a part of the puzzle is missing!
Main Assembly
Not all garage door openers are created equal; therefore, each garage opener is going to have its own unique instructions. Use these instructions as a guide for putting the body of the opener together carefully, which will include a rail, carriage, and motor compartment.
Blocking
It is possible that your garage already has the blocking installed, but, just in case, you should make sure. This is where the garage door opener will be attached to the ceiling. Keep in mind that you never want to install blocking straight into sheetrock!
Lean On
The end of the assembly should be leaned up opposite to the motor compartment, up above the garage. Attach the bracket to the wall above the door and then insert the end of the assembly into it. If you’re not sure what part is which, check your instructions.
You should lay all the parts out, go through them, and make sure that you have all of the ones that you're supposed to. It's a rough business to start building and realize midway that a part of the puzzle is missing!
Main Assembly
Not all garage door openers are created equal; therefore, each garage opener is going to have its own unique instructions. Use these instructions as a guide for putting the body of the opener together carefully, which will include a rail, carriage, and motor compartment.
Blocking
It is possible that your garage already has the blocking installed, but, just in case, you should make sure. This is where the garage door opener will be attached to the ceiling. Keep in mind that you never want to install blocking straight into sheetrock!
Lean On
The end of the assembly should be leaned up opposite to the motor compartment, up above the garage. Attach the bracket to the wall above the door and then insert the end of the assembly into it. If you’re not sure what part is which, check your instructions.
Heavy Lifting
The motorized door-lifter needs to be put in its place on the ceiling. You want to make sure that it’s high enough so it won’t get in the way of vehicles or people walking, causing unwanted accidents. Screw it in tight!
Bracket Up Again
Now it’s time to attach the bracket on the garage door with the bracket attached to the automatic opener blocking. The distance between the garage door and the ceiling mechanism may vary, but fortunately your connection using the bracket is flexible for different lengths.
Safety First
It’s a good idea to install a safety rope that will allow for an emergency or lift of the garage door. This emergency release cord should fall low enough to be within easy reach of adults, but not low enough for kids to have access to it.
Electric Eyes
These puppies are the little laser lights that sense whether or not someone has walked past your garage door while it’s attempting to close. To set up your electric eyes, they have to be directly even with each other. They should come with a wiring diagram, but the gist of the installation involves using a wire to check that the electric eyes are mounted parallel to each other.
Test It
All the grunt work is finished—now it’s time for you to test it. Make sure that the garage door opener is responsive using your handheld device, as well as the wall mount you should have installed for it.
When it comes to installing a new garage door opener, it’s easy to get lost in the details. That’s why it’s a good idea to get professional garage opener installation in Marietta, GA.
RSS Feed
