Though some may opt for professional assistance when reattaching and resetting the garage door after an emergency pull, it’s also a task that the average homeowner can do without any special tools or expertise. In fact, in just a few steps, you can reset your door and have it fully operational in no time. Keep reading to learn the steps required to reattach and reset your garage door after an emergency pull.
Step 1: Check the Sensors
Many newer model garage doors will reattach themselves after an emergency pull, but that doesn’t always work. The first thing you should do to reset the door after an emergency release is to check the sensors, as they could be preventing the re-engagement process from occurring. Find the sensors, which are typically located on the interior of the garage door frame. If you see blinking lights, that means there is an obstruction that is preventing the door from operating. Check for obstructions and see if the situation corrects itself.
Step 2: Manually Reengage the Door
Locate the pull cord for the emergency release. You’ll need to pull back on it while paying close attention to the spring lever at the other end of the cord. That lever should line up and attach itself to the garage door opener mechanism with a click. This should be a smooth, careful action, as yanking the cord too hard could damage the cord or the operating mechanism.
Step 3: Move the Door into the Carriage
Once the spring lever is reengaged with the garage door opener mechanism, you can then manually guide the door back into its carriage. Some garage door openers allow you to automatically reset the door in the opener carriage using the remote. Once the trolley locks into the back of the carriage, you should hear a loud click.
Step 4: Test It Out
Once you’ve reset the door in the carriage and engaged the trolley, you need to test the function of the door. Simply attempt to open and close the door several times to ensure proper operation. If everything works as it should, your door is fully reset. If you still experience problems such as loud noises or jerky movement, check the troubleshooting manual for your garage door opener for potential causes. Do not attempt to operate the garage door if it won’t open and close smoothly on command. If you can’t determine the cause through troubleshooting, contact a professional garage door company and schedule a service call.
Just because you’ve pulled the emergency release doesn’t mean you need garage door replacement in Kennesaw, GA, as reattaching and resetting the door in the opener mechanism is simple enough that anyone can do it. While you may feel more comfortable ceding the job to a garage door professional, most homeowners can reset garage doors without any special tools or training. To learn more about reattaching and resetting your garage door after an emergency pull, contact IDC Garage Doors at (678) 363-0701.